Tiles in Daltonganj, Garhwa & Jharkhand: Find the Best Vitrified Tiles Near You
Building a residential property in Palamu has changed over the years. Daltonganj, or Medininagar as it is known, is the headquarters of the Palamu division and has construction activity scattered across the area. Newly created residential plots on the bypass road, independent houses being built in Shahpur and Hanuman Nagar, and apartment complexes that could not even be imagined 15 years ago.
The surrounding areas of Garhwa, Hariharganj, and Chhatarpur have seen an increase in the construction of proper houses, and an increase in better-quality needs and construction of houses.
Tiles are where people begin to question the quality of the construction of their homes.
Why Tile Selection Matters More in This Region
The Palamu division, covering more than 12,777 square kilometers of the Palamu, Garhwa and Latehar districts and having a population of almost 4 million, has challenging climatic conditions that unite the region.
The region has severe weather conditions. The surface temperature can exceed 40°C. Poor quality tiles cause problems by expanding and cracking the grout, leaving edges lifting after just a couple of years.
The monsoon brings heavy rains to the North Koel River basin. High moisture content in the air increases the tendency of water absorption in tiles and makes them weak, causing them to fail during the next hot season.
Add the fine red-soil dust that settles across homes during the dry season, and you will understand the need. Those looking for tiles in Jharkhand (specifically the Palamu belt) require tiles that tackle heat, moisture and the task of constant cleaning without losing their strength.
What to Look for When Buying Tiles
Water absorption below 0.5% is the key specification. Vitrified tiles that meet this requirement will not absorb moisture during a monsoon; hence, there will be no cracking, no loosening, and no weakening of the tiles with the daily routine of mopping.
Glassy tiles will look good in the shop but will show footprints and will attract dust in your home where the settlement of red soil is a daily phenomenon. The floor finish should be either matte or satin.
For the bathroom tiles, an anti-slip rating is a must. Many houses still do not have proper plumbing; hence, the floor of the bathroom gets wet and needs an R11 rating to ensure the safety of elderly people and the young.
Batch consistency is also very important. If you are using tiles to cover a large area, tiles of the same batch should be used. The shade of the tiles varies in different batches and becomes permanent once the tiles cover the area.
The tiles to be used on the verandas and parking areas should be outdoor tiles. Indoor tiles, which are exposed to the sun and rain, will not last even for a single monsoon. Tiles of outdoor use need to be stable to UV rays and low in moisture absorption.
What Types of Tiles Work Best for Palamu Homes?
- Living rooms and halls: Use glazed vitrified tiles in 600x600mm or 600x1200mm size in a warm neutral color with a matte or satin finish. It is preferable to use a large-format tile, as this requires fewer grout lines, and grout in the dusty climate uniquely discolors over time.
- Bedrooms: Use either a matte vitrified or wood-look tile. The warm shade keeps the room cool during the summer months and cozy during the winters.
- Kitchens: Use a matte flooring tile with an anti-slip feature and a high resistance to staining from oils and spices. Matte flooring tiles should also be used in combination with wall tiles with a matte finish behind the cook top/cooking area, as they are more resistant to stains.
- Bathrooms: Use R10 or higher rated anti-slip vitrified floor tiles in combination with semi-matte finish wall tiles. Epoxy grout should be used in this region as the hard water that is prevalent throughout the area stains cement grout within a few months of installation.
- Verandas, courtyards and parking: Use outdoor-rated textured tiles with low water absorption. For parking areas, use dedicated parking tiles of 18mm thickness or more, not standard floor tiles.
Buying Tiles in Daltonganj and Garhwa
There is an improvement in the tiles available in the smaller Jharkhand towns. Daltonganj and Garhwa dealers now have a much wider range than they used to carry, including premium vitrified and large format tiles that used to be available only in Ranchi and Patna.
Here are some tips to consider before your purchase:
You should ask the dealer to show you the water absorption specification on the box rather than relying on a verbal description. You should also check to see if the tile is rated for floor or wall use, since those aren't interchangeable. Make sure you order all of the tiles in one batch, since batch matching is very important when dealing with tiles. Order at least 10-12% more to account for cuts and tiles that will inevitably break.
Most reputable tile companies will ship your requested product through their regional dealer network, even if it's not available in your area, so it's worth asking.
Building for the Long Term
A tiled floor has a lifespan of 15-20 years. In the monsoon regions where there is severe summer heat and humidity, the difference between using a proper tile versus a cheap tile shows in just 3 years and will definitely cost more in the long run.
The important specifications of a floor tile are easy. It should have an absorption rate of less than 0.5% for water and should have a matte finish. For wet spaces, you must have tiles with a minimum R10 rating. Use outdoor-rated tiles for everything that is outdoors.
Check out the entire range of vitrified floor, bathroom, and outdoor tiles at viterotiles.com